Layer structure and packaging application illustrations; schematic, not to scale. Colors do not represent actual film colors. Only identified coating and substrate layers are shown; unspecified primers or bonding layers are omitted. View full-size structure ↗
BOPP Matt Soft Touch Film
BOPP-SOFT-TOUCH is an SD PACK BOPP Matt Soft Touch Film on a BOPP substrate. Typical application: wet or thermal lamination onto paper and paperboard; foil stamping and UV spot coating.
- Substrate
- BOPP
- Coating
- Functional surface treatment
- Structure
- Soft-touch surface
Technical data is available below. Include your target specifications when requesting samples.
Meet BOPP-SOFT-TOUCH.
BOPP-SOFT-TOUCH is an SD PACK BOPP Matt Soft Touch Film on a BOPP substrate. Typical application: wet or thermal lamination onto paper and paperboard; foil stamping and UV spot coating.
Discuss your packaging format and converting process with our team to confirm the right film for your project.
Product at a glance.
| Website product reference | BOPP-SOFT-TOUCH |
|---|---|
| Product family | Specialty Films |
| Base substrate | BOPP |
| Coating material | Functional surface treatment |
| Coated sides / structure | Soft-touch surface |
| Typical applications | Wet or thermal lamination onto paper and paperboard; foil stamping and UV spot coating. |
Typical physical properties
SI values transcribed from the supplied BOPP-SOFT-TOUCH TDS. The sheet lists the following typical values.
| Property / condition | Unit | Test method / condition | Typical value |
|---|---|---|---|
| Thickness | µm | Not specified | 15, 18 |
| Gloss | % | Not specified | 6.5 |
| Haze | % | Not specified | 84.9 |
| Tensile strength (MD) | MPa | Not specified | 154 |
| Tensile strength (TD) | MPa | Not specified | 182 |
| Elongation at break (MD) | % | Not specified | 116 |
| Elongation at break (TD) | % | Not specified | 98 |
| Coefficient of friction | Silky/silky | Not specified | 0.61 |
| Thermal shrinkage (MD) | % | 120°C, 5 min | 0.35 |
| Thermal shrinkage (TD) | % | 120°C, 5 min | 0.2 |
| Wetting tension (silky side) | dyne (as stated) | Not specified | > 38 |
The TDS lists typical MD elongation of 116% against a stated standard of ≥150%, and TD elongation of 98% against ≤100%. These source entries need confirmation before specification or acceptance. No model code is stated in the source; this website uses the product name as its reference.
Where it fits.
Wet or thermal lamination onto paper and paperboard; foil stamping and UV spot coating.
Applications are summarized from the supplied product literature. Confirm suitability for your packed product, processing conditions and destination-market requirements before ordering.
Let’s discuss BOPP-SOFT-TOUCH.
Tell us what you need. Our sales team can discuss the available specifications and sample requirements.
Before you order.
Can I download a technical data sheet?
Yes. Use the TDS download button in the Specifications section. Contact our team to confirm current specifications, availability and test conditions.
How do I request a quote or sample?
Send your application, thickness, width, quantity and destination. Sample availability, minimum order quantity, lead time and commercial terms will be confirmed by the sales team.
